Mitus

Mitus 206LA 600W + 300W – 134dB SPL Active precision coverage vertical array

  • 2 x 6.5’’ (165 mm) B&C neodymium woofers with 1.7’’ (44 mm) coil
  • 1.4’’ (36 mm) exit B&C neodymium driver with 2.5’’ (64 mm) coil
  • Frequency response from 68Hz to 20KHz
  • Latest class D built-in amplifiers, 600Wrms to the LF and 300Wrms to the HF with switch mode power supply
  • DSP on-board with 8 presets, +/- 5db HF level control for accurate amplitude shading
  • Control panel with XLR input and link, volume, presets, HF level, HP-filter, ground-lift
  • 100° horizontal waveguide with very low distortion and near flat wavefront up to 18Khz
  • High impact polypropylene  gas-injected enclosure withintegrated rigging hardwareadjustable with 0° to 10°angle between cabinets at2° step
  • Ideal for small to medium sized application, from single pole mounted loudspeakers with 100°H x 10°V coverage
  • to multiple cabinet full sized line array, the MITUS 206LA maybe used also in  outdoor applications where the system is not directly exposed to the elements
  • Wide range of hardware accessories for flying and ground stacked configurations
  • Very lightweight, only 14Kg

Mitus 212FSA

1200W – 138dB SPL Processed Flyable Active Subwoofer

  • Compact vented band pass subwoofer sharing the same width and hardware suspension of the MITUS 206LA
  • 320 mm (2 x 12’’) B&C neodymium magnet high excursion subwoofers with 75 mm (3’’) voice coils
  • Frequency Response from 45Hz to 120Hz
  • Class D amplifier delivering 1200WRMS
  • Switch mode power supply
  • DSP with 8 presets, cardioid and infra configurations, delay
  • Control panel with XLR input and link, volume, presets, delay, phase 0°-180°, ground-lift
  • 15 mm (5/8’’) birch plywood enclosure, scratch resistant black paint
  • Low frequency extension cabinet for the MITUS 206LA line array for flying or ground stacked configurations.
  • M20 top mount stand socket

MITUS 215a

1100W + 250W RMS – 136dB SPL Processed Active Speaker

  • 2-way, bi-amplified, bass-reflex design
  • 2 x 380mm (15”) B&C neodymium magnet woofer with 75mm (3”) voice coil
  • 50mm (2”) exit B&C HF driver with 64mm (2.5’’) voice coil
  • Frequency response from 42Hz to 20kHz
  • Class D built-in amplifiers, 1100Wrms to the LF and 250Wrms Class G to the HF
  • Switch mode power supply
  • DSP with 6 EQ presets
  • 60°H x 40°V rotatable HF horn
  • Birch plywood enclosure, scratch resistant black paint finish
  • Control panel with XLR input and link, volume, presets, HP filter, ground-lift
  • 12 x M10 fly points and two FBT design aluminum handles
  • Ideal for live sound reinforcement applications and permanent installations

Mitus 218SA Processed Active Subwoofer 2000W RMS – 145dB SPL

  • Large vented bass-reflex subwoofer 
  •  2 x 460mm (18’’) custom B&C high excursion subwoofers with 100mm (3.9’’) coil 
  •  Frequency Response from 30Hz to 100Hz 
  •  Class D amplifiers delivering 2000Wrms with switch mode power supply 
  • DSP with 6 EQ presets, cardioids and infra configurations, delay  
  • 18mm (3/4’’) birch plywood enclosure, textured scratch resistant black paint 
  •  Six FBT design aluminum handles 
  • Perfect low-frequency extension for the MITUS range and an ideal companion for the MITUS 206LA line array for ground stack applications with optional MTB206 metal base. 
  •  M20 top mount stand socket 
  • Optional 4 swivel mount casters 100 mm (4’’) on request  
  • Control panel with XLR input and link, volume, presets, delay, phase 0°- 180°, groundlift